febetek

USB-A + USB-A Waterproof Fast Charger (QC2.0/QC3.0 18W+18W)

Motorcycle waterproof dual USB-A fast charger (QC2.0/QC3.0 18W+18W) with rubber dust cap

About this series

Input: 12V USB-A, USB-A single-port fast charging USB-A, USB-A dual-port simultaneous fast charging output

Features

  • Output: 12V
  • Protocol: USB-A (QC2.0, QC3.0) 18W

Common Applications

  • 12V auxiliary systems for all gasoline and electric motorcycles

Frequently Asked Questions

What is the waterproof rating?
The series ships with a rubber dust cap for typical motorcycle outdoor environments. Exact IP rating varies by part number — request the datasheet via RFQ for confirmation.
What USB charging protocols does this module support?
Depending on the part number, common supported protocols include USB Power Delivery (PD 3.0, PPS) and Quick Charge (QC 3.0 / 4.0). Refer to the datasheet of each SKU for the exact protocols supported.
What is the input voltage range?
Automotive versions support 12V / 24V wide input (typically 9-32V) for passenger cars and commercial trucks. Motorcycle versions are optimized for 12V systems. See datasheet for exact V_in range.
What protection features are included?
Standard protections include over-voltage (OVP), over-current (OCP), over-temperature (OTP), and short-circuit (SCP). Automotive-grade modules also include surge protection for 12V / 24V vehicle thermal design.
Can you customize the form factor or connector?
Yes. OEM customers can customize the housing, connector, cable length, labeling, and more. Share your design requirements and target annual volume through our RFQ form for complete engineering-through-production support.